PJM Capacity Prices Increase Again? What Businesses Should Know for 2027

If you run a business in New Jersey, Pennsylvania, Maryland, Ohio or another state served by PJM Interconnection, your electricity bill has probably looked different since June 2025. That’s when the 833% increase in PJM capacity prices first showed up on commercial bills. More than a year later, it’s fair to ask whether those costs are coming back down. The short answer is not yet, and probably not for a while.

The team at The Energy Consultant NJ shares what has happened since that first price jump, why capacity costs matter so much for commercial and industrial businesses, and what energy advisors are recommending.

What Are Capacity Charges?

PJM runs the power grid for 13 states and Washington, D.C. Its job is to make sure there’s enough electricity available on the hottest and coldest days of the year, when demand is highest. To do that, PJM holds auctions in which power plants and demand response providers commit to being available in a future year. The price set in those auctions becomes the capacity charge that customers pay.

For businesses, this charge is tied to something called a peak load contribution, or PLC. Your PLC is based on how much electricity your business used during a small number of the grid’s highest-demand hours, usually in summer. That means two businesses using the same total amount of electricity can pay very different capacity costs, depending on when they use it.

Mike O’Reilly, an independent energy consultant who writes as The Energy Consultant NJ, estimates that capacity charges can add 1 to 4 cents per kilowatt-hour to a commercial bill and make up roughly 20% to 30% of the monthly total. For a large facility, that’s a significant share of operating costs.

How Did We Get Here?

The 2025/2026 auction, held in July 2024, cleared at $269.92 per megawatt-day. The year before, the price was about $29. That’s where the 833% figure comes from.

Many businesses hoped that jump would be a one-time spike. Instead, the next three auctions all landed even higher:

  • 2026/2027 (in effect since June 1, 2026): $329.17 per megawatt-day
  • 2027/2028: $333.44 per megawatt-day
  • 2028/2029: $325 per megawatt-day

Each of those three auctions hit a price cap that was put in place to protect customers from even larger increases. Without the cap, PJM’s own simulation estimated that the latest auction would have cleared at about $555 per megawatt-day. The region also fell about 6,831 megawatts short of its reliability target in the July 2026 auction, the second shortfall in a row.

Why Are Prices Staying High?

The main issue is that demand is growing faster than new supply. Older power plants are retiring, and new projects are moving slowly through the process of connecting to the grid. At the same time, electricity demand keeps rising, and data centers account for most of the increase in PJM’s recent load forecasts.

O’Reilly points to several factors behind the pressure, including faster plant retirements, stricter reliability standards and volatile natural gas prices. Based on these trends, he expects high capacity prices to continue for several years rather than fade quickly.

What This Means for Commercial and Industrial Businesses

Capacity costs used to be a small, easy-to-ignore part of the bill. That’s no longer true. Businesses that signed electricity contracts before 2025 may have been protected for a while. But as those contracts renew, the new prices show up in the offers they receive.

Budgeting has changed too. Because capacity prices are set years in advance, businesses can actually see what’s coming. Auction results already show capacity prices staying near record levels through May 2029. That makes planning easier, but only if someone in the business is paying attention.

Practical Steps to Consider

Energy advisors, including O’Reilly, generally recommend a few starting points:

  • Check your contract dates and terms. Find out when your current electricity contract ends and whether capacity costs are fixed or passed through to you.
  • Compare fixed and pass-through options. A fixed price gives you predictability, while a pass-through structure follows the market more closely. Neither is right for every business.
  • Watch your peak usage. Because your PLC is based on a few peak hours, cutting back on those days can lower future capacity charges. Simple steps like adjusting air conditioning or shifting some production can make a difference.
  • Look into demand response. Some programs pay businesses to reduce their usage when the grid is under strain.
  • Review energy efficiency. Using less electricity overall helps reduce both energy and capacity costs.

“Our goal is to really provide clear insights and practical strategies that are going to help protect your bottom line,” O’Reilly says of his work with business owners.

The Bottom Line

The 833% increase in PJM capacity rates wasn’t a one-year event. It marked the start of a period of higher electricity costs that auction results show continuing for at least the next few years. For commercial and industrial businesses, the most useful thing to do now is understand how capacity charges affect your bill and plan ahead. Even small changes to how and when you use power can help keep those costs under control.

The Energy Consultant NJ
askmike@theenergyconsultantnj.com
+1 201 892 2587
104 W 16th St
Bayonne
NJ
07002
United States